暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 64GB DDR5 4800MHz CL40 2Rx4 1.1V 288-PIN ECC Registered RDIMM Supermicro H14DSH memory upgrade

SKU CH-ESYN-79K34

64 GB DDR5-4800 ECC registered RDIMM validated for the Supermicro H14DSH motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity lets your Supermicro H14DSH handle large workloads without swapping
  • Registered ECC design offloads the memory controller and corrects single-bit errors for stable full-population operation
  • DDR5 4800 CL40 at 1.1 V matches the board's exact timing and voltage requirements
  • 2Rx4 288-pin RDIMM form factor fits the motherboard's memory-population rules precisely
  • Lifetime replacement warranty with US-based technical support protects your server investment

64GB DDR5-4800 ECC RDIMM for Supermicro H14DSH

This 64GB DDR5-4800 (PC5-38400) registered ECC module is built for the Supermicro H14DSH motherboard. It runs at 1.1V with CL40 latency and a 2Rx4 rank layout. The 288-pin RDIMM form factor matches the board's registered memory requirement exactly.

Check manual for population rules

Server memory support varies by model and BIOS revision. Consult the Supermicro H14DSH manual for approved DIMM population order, maximum capacity per slot, and total system limits before ordering. Verify that the board accepts 2Rx4 registered modules at the rated speed and voltage.

No heat spreader; lifetime warranty

The module ships without a heat spreader, relying on server chassis airflow for cooling. The package includes the single 64GB RDIMM. A lifetime replacement warranty and free US-based technical support cover the part after installation.

特長

  • 64 GB capacity lets your Supermicro H14DSH handle large workloads without swapping
  • Registered ECC design offloads the memory controller and corrects single-bit errors for stable full-population operation
  • DDR5 4800 CL40 at 1.1 V matches the board's exact timing and voltage requirements
  • 2Rx4 288-pin RDIMM form factor fits the motherboard's memory-population rules precisely
  • Lifetime replacement warranty with US-based technical support protects your server investment

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 64 GB DDR5 4800 MHz CL40 RDIMM arrive as a single module or a kit, and is anything else required for installation?

The package contains one 64 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V CL40 288-pin ECC registered RDIMM. No additional parts are needed; the module plugs directly into a compatible Supermicro H14DSH DIMM slot.

Should I choose the 64 GB 2Rx4 CL40 version or a different capacity or rank for the H14DSH?

This 64 GB 2Rx4 CL40 module matches the exact rank, voltage and timing the H14DSH memory controller expects. Other capacities or ranks may not be recognised at full speed or capacity.

What does the 4800 MHz PC5-38400 rating mean once the module is installed in the server?

The module will run at DDR5 4800 MT/s with CL40 latency at 1.1 V, delivering the full PC5-38400 bandwidth the H14DSH platform specifies for registered ECC memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。