We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR5 5600 CL46 2Rx8 ECC RDIMM Supermicro H14DST-F

SKU CH-F7B0-Q0TXP

192 GB server kit with six 32 GB DDR5 5600 CL46 ECC registered DIMMs validated for Supermicro H14DST-F

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Show 30 more configurations
  • 192 GB capacity with six 32 GB modules for full server population
  • DDR5 5600 speed rated at CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors and buffers every slot
  • 10 V operation matches the motherboard memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F fitment

Server DDR5 kit for Supermicro H14DST-F

This 192GB kit delivers six 32GB DDR5 5600 Registered ECC RDIMMs tuned to CL46 at 1.1V. It targets administrators who need the exact rank and timing the H14DST-F memory controller expects for full-capacity operation.

Registered ECC architecture and verified fitment

Registered buffering offloads the memory controller so all slots run fully populated at rated speed while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor matches the board's physical and population requirements.

2Rx8 organization at CL46 1.1V

The dual-rank 2Rx8 layout, CL46 latency and 1.1V voltage are the single specification set that decides whether the modules initialize at 5600 MT/s on this platform. Verify your manual's population rules before purchase.

Highlights

  • 192 GB capacity with six 32 GB modules for full server population
  • DDR5 5600 speed rated at CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors and buffers every slot
  • 10 V operation matches the motherboard memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F fitment

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx8 registered ECC modules need any firmware updates or reconfiguration if I add more kits later?

The kit is an exact-match upgrade for the Supermicro H14DST-F, so the memory controller recognises the 2Rx8 registered ECC timings at full capacity without extra firmware steps.

What limit appears first when the 192 GB kit runs at DDR5-5600 CL46 continuously?

Sustained operation at the rated 5600 MT/s and CL46 latency is the primary limit; the registered buffer and ECC maintain stability across all six slots.

How much heat and power should I expect from six 32 GB DDR5 RDIMMs at 1.1 V all day?

Each module runs at 1.10 V without a heat spreader, so total power draw stays low and airflow from the server chassis is sufficient for continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.