We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 288GB (6x48GB) DDR5 5600 CL46 1.1V ECC Registered RDIMM for Supermicro H14DSG-OD memory upgrade

SKU CH-N8YT-5JETW

A 288 GB kit of six 48 GB DDR5-5600 CL46 1.1 V ECC registered RDIMMs built for the Supermicro H14DSG-OD motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Show 30 more configurations
  • 288 GB total capacity from six 48 GB modules
  • DDR5-5600 speed with CL46 latency and 1.1 V operation
  • Registered ECC RDIMM design prevents silent data corruption
  • Verified fit for Supermicro H14DSG-OD motherboard
  • Major OEM Samsung, Micron, or Hynix DRAM chips

Exact-match server memory upgrade

This NEMIX RAM kit delivers 288GB across six 48GB DDR5 Registered ECC RDIMMs rated at 5600MHz with CL46 timings at 1.1V. The modules match the precise rank, voltage and timing the Supermicro H14DSG-OD memory controller expects for full-capacity recognition at rated speed.

Built for registered ECC platforms only

Suits administrators populating every slot on a Supermicro H14DSG-OD motherboard that requires Registered RDIMMs with ECC. Unsuitable for workstations or desktops that accept only unbuffered UDIMMs, for systems limited to lower maximum capacities per slot, or for any board that cannot run 2Rx8 Registered modules at this voltage and speed.

Straightforward DIMM installation

Insert each 288-pin RDIMM into the approved slots following the motherboard manual's population order for six modules. The most common issue is skipping the manual's sequence, which can prevent the system from recognising the full 288GB or from booting at the rated 5600MHz speed.

Highlights

  • 288 GB total capacity from six 48 GB modules
  • DDR5-5600 speed with CL46 latency and 1.1 V operation
  • Registered ECC RDIMM design prevents silent data corruption
  • Verified fit for Supermicro H14DSG-OD motherboard
  • Major OEM Samsung, Micron, or Hynix DRAM chips

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard slot type does this 288-pin DDR5 RDIMM kit require?

The kit uses 288-pin DDR5 RDIMM modules, which fit only registered DIMM slots on the Supermicro H14DSG-OD motherboard.

Can I mix these 2Rx8 CL46 modules with existing DDR5 RDIMMs of a different rank or speed?

Mixing ranks or speeds is not recommended; the board expects matched 2Rx8 modules at 5600 MT/s for full 288GB capacity and stable operation.

How do I verify the 288GB kit is running at 5600 MT/s with ECC active after installation?

Check the BIOS memory information screen: it should show 288GB total, 5600 MT/s speed, CL46 latency, and ECC enabled for each of the six slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.