We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-5600 ECC RDIMM 192GB 6x32GB CL46 1.1V Supermicro H14DSH memory upgrade

SKU CH-DRAR-DR7AR

Six 32 GB DDR5 ECC registered DIMMs deliver 192 GB at 5600 MT/s with CL46 latency and 1.1 V operation for the Supermicro H14DSH

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Show 30 more configurations
  • 192 GB total capacity from six 32 GB modules for dense memory configurations
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H14DSH
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit

Exact-match upgrade for Supermicro H14DSH

This 192GB kit delivers six 32GB DDR5-5600 registered ECC RDIMMs built to the board's required 2Rx8 rank, 1.1V voltage and CL46 timing. The modules are spec-matched so the memory controller recognises the full capacity at rated speed without manual tuning.

DDR5 RDIMM population rules limit flexibility

Registered DIMMs must follow the motherboard's approved slot order and maximum supported capacity per channel. Mixing ranks or skipping slots can prevent the system from posting or force a lower operating frequency.

Straightforward installation if the manual is

Align the 288-pin key, press firmly until the latches click, and populate slots in the sequence the H14DSH manual specifies. The most common issues are incomplete seating, wrong slot order, or exceeding the board's validated capacity per channel.

Highlights

  • 192 GB total capacity from six 32 GB modules for dense memory configurations
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H14DSH
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 192GB kit or a smaller capacity for my Supermicro H14DSH?

The kit provides 192GB total across six 32GB modules, matching the board's DDR5-5600 RDIMM requirements for full-capacity operation.

What does the DDR5-5600 rating deliver once installed in the server?

Modules run at 5600 MT/s with CL46 latency at 1.1V, giving the memory controller the exact speed and timing it expects for stable full-population performance.

How does the 288-pin RDIMM interface limit or enable this memory on the H14DSH?

The 288-pin registered DIMM format is the only type the H14DSH accepts; its buffered design lets all six slots run at the rated 5600 speed without signal degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.