We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
UV pink brass 90-degree rotary elbow with 20mm extension, G1/4 threads

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow UV Pink

SKU CH-RNVB-Q1F4B

G1/4 90° rotary elbow with 20 mm extension and 360° swivel for tight water-cooling loops

  • TypeFittings

Option UV Pink

Show 9 more configurations

Struck-through versions exist but are not stocked here.

  • 360-degree rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from components at unconventional angles
  • 20 mm extension provides extra clearance when other parts are in the way
  • 43 mm total height fits tight build spaces while maintaining flow
  • SX powder-coated UV pink finish adds a distinctive colour accent to the loop

Loop routing solution

The PrimoChill G1/4 90° rotary extension elbow redirects a hard-tube or soft-tube run by ninety degrees while adding twenty millimetres of clearance. Its male-to-female G1/4 threads suit any standard water-cooling component. The 360-degree rotary base lets the installer orient the outlet to any angle after the fitting is seated. Builders working around tight motherboard heatsinks or crowded GPU blocks gain a compact path change without extra fittings.

Thermal and acoustic impact

The brass body and powder-coated finish add negligible thermal resistance to the loop. No moving parts are present, so the fitting contributes zero noise and draws no power. Installed base height is twenty millimetres and total height forty-three millimetres, leaving ample room for coolant flow. Thread depth of five millimetres ensures a secure seal with standard G1/4 ports.

Included accessory

The package supplies a single male-to-female 90° rotary 20 mm extension elbow fitting. No additional seals, tools or software are bundled. The SX powder-coated UV pink finish provides colour coordination for themed builds while protecting the brass from corrosion. Installers must supply their own tubing, clamps or compression fittings to complete the connection.

Highlights

  • 360-degree rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from components at unconventional angles
  • 20 mm extension provides extra clearance when other parts are in the way
  • 43 mm total height fits tight build spaces while maintaining flow
  • SX powder-coated UV pink finish adds a distinctive colour accent to the loop

Specifications

TypeFittings

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the G1/4 90° rotary elbow and what step is often missed?

Thread the male G1/4 end 5 mm deep into the component port, then rotate the 360° collar to aim the female outlet before tightening the lock ring; skipping the lock-ring step lets the fitting swivel under pressure.

What maintenance or replacement will this UV pink fitting need over time?

The SX powder-coated brass body resists corrosion, so only periodic visual checks for coolant residue at the O-ring seat are needed; replace the fitting if the coating chips or threads show wear.

What limit appears first during sustained loop operation with the 20 mm extension?

The 43 mm total height and 20 mm installed base can crowd adjacent blocks, so spatial clearance becomes the practical constraint before flow or thermal limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.