EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
16GB DDR4 2933MHz desktop module runs at 1.2V on a 288-pin DIMM for AMD and Intel systems
This 16GB DDR4 2933MHz (PC4-23400) DIMM is built as a compatible replacement for Samsung M378A2K43DB1-CVF. It targets desktop owners who want a straightforward capacity increase without moving to a newer memory generation. The single 288-pin unbuffered non-ECC stick runs at the standard 1.20V DDR4 voltage.
Verify that your board accepts DDR4 DIMMs at 2933MHz and that the CPU memory controller can run at this data rate. Some platforms default to a lower JEDEC speed unless the BIOS is set to the rated frequency. Confirm the system does not require registered or ECC modules, because this stick is unbuffered non-ECC.
The module operates at its tested 2933MHz frequency under continuous load without exceeding the 1.20V specification. Because it uses standard JEDEC timings rather than an XMP profile, sustained bandwidth remains stable during long rendering, compilation or virtualisation sessions. Thermal output stays predictable in a typical desktop airflow environment.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| Tested Frequency | 2933 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The kit contains one 16GB DDR4 2933MHz 288-pin DIMM; no additional module is included.
Choose this 2933MHz PC4-23400 1.20V module if your motherboard specifies DDR4 2933; otherwise select the speed your board lists.
It runs at 2933MT/s with a peak bandwidth of PC4-23400, giving the memory controller 16GB of non-ECC unbuffered capacity at standard 1.20V.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?