AFRNDK
AFRNDK E-AE1M 230MH/s 2000W Aleo mining hardware
An ASIC miner for the Aleo blockchain delivering 230 MH/s at 2000 W with air cooling and Ethernet connectivity
- TypeMining Machine/Miner
- Crypto AlgorithmzkSNARK
- Mining HardwareASIC
- Hashrate230MH/S
- Power Consumption2000W
- 230 MH/s zkSNARK hashrate for Aleo mining
- 2000 W power draw with included PSU
- 50 dB noise level from dual-fan air cooling
- Operates at 5–45 °C ambient temperature range
- Accepts 200–240 V input voltage
Aleo ASIC miner for zkSNARK workloads
The AFRNDK E-AE1M is an application-specific integrated circuit built to mine Aleo using the zkSNARK algorithm. It delivers a rated hashrate of 230MH/s while drawing 2000W of power. The unit targets operators who run dedicated mining infrastructure rather than general-purpose computing.
Air-cooled chassis with dual fans and Ethernet link
The enclosure uses forced-air cooling driven by two fans and produces a noise level of 50db during operation. It connects to the network through a single Ethernet port and is rated to run in ambient temperatures from 5 to 45 °C with humidity between 5 and 95 %. The power supply accepts 200 to 240V input, so the installation must provide a circuit capable of sustaining the 2000W load.
Ships as a complete unit
The miner arrives assembled with its power supply already installed, removing the need to source or cable a separate PSU. A serial number is included for inventory tracking and manufacturer support. No additional software licences or configuration media are bundled; the device is managed through its native web interface once it receives an IP address.
商品特色
- 230 MH/s zkSNARK hashrate for Aleo mining
- 2000 W power draw with included PSU
- 50 dB noise level from dual-fan air cooling
- Operates at 5–45 °C ambient temperature range
- Accepts 200–240 V input voltage
商品規格
| Brand | Gold shell |
|---|---|
| Series | E-AE1M |
| Model | E-AE1M |
| Type | Mining Machine/Miner |
| Crypto Algorithm | zkSNARK |
| Mining Hardware | ASIC |
| Hashrate | 230MH/S |
| Power Consumption | 2000W |
商品問答
What network interface does the E-AE1M use and what practical limit does it impose?
The E-AE1M connects via Ethernet so pool latency and bandwidth are bounded by your local switch and ISP link rather than by any on-board wireless radio.
What voltage supply and circuit capacity does the E-AE1M require to fit safely in a rack or shelf?
The unit needs a 200-240 V feed and a circuit rated for at least 2000 W; verify your PDU or wall outlet can sustain that load before mounting.
How is the E-AE1M initially configured and which step do builders most often skip?
Connect the Ethernet cable, apply 200-240 V power, then reach the miner’s web UI at its DHCP address to enter pool credentials; skipping the pool setup leaves the hashrate idle.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



