Enfain
Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 30m Aqua Blue
A 30-metre OM3 multimode duplex patch cable with LC and FC connectors, ceramic ferrules and a 3.0 mm aqua jacket rated for 10 Gbit/s at 850 nm with typical insertion loss of .2 dB
- Low insertion loss with typical .2 dB and maximum .3 dB
- High return loss exceeding 38 dB for signal integrity
- OM3 core supports 10 Gbps over 30 m distance
- 0 mm PVC jacket rated for -20°C to +60°C operation
- Ceramic ferrules tested for 1000 mating cycles
30-metre OM3 duplex patch cord
This Enfain OM3 multimode fibre cable spans 30 metres with LC and FC connectors at each end. The aqua-blue 3.0 mm PVC jacket protects a 10-gigabit core operating at 850 nm. It suits data-centre links, server rooms and switch uplinks that require duplex multimode connectivity.
Sustained-link performance
Typical insertion loss is .2 dB and never exceeds .3 dB, while return loss stays above 38 dB across the full length. The cable tolerates a 330 mm bend radius and is rated for 1000 mating cycles without degradation. Operating temperature spans from minus 20 °C to plus 60 °C.
OM3 10-gigabit core at 850 nm
The single specification that determines compatibility is the OM3 10-gigabit core tuned for 850 nm transmission. Installations needing single-mode fibre, higher bandwidth grades such as OM4, or connector types other than LC-FC will require a different cable.
商品特色
- Low insertion loss with typical .2 dB and maximum .3 dB
- High return loss exceeding 38 dB for signal integrity
- OM3 core supports 10 Gbps over 30 m distance
- 0 mm PVC jacket rated for -20°C to +60°C operation
- Ceramic ferrules tested for 1000 mating cycles
商品規格
本商品目前尚未公佈規格。
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
商品問答
Does the 3.0 mm jacket add noticeable heat or power draw when the link runs continuously?
The passive fibre draws no power and generates no heat; only the active transceivers at each end consume electricity.
What connectors must my existing equipment provide for this LC-FC duplex cable to plug in directly?
One side needs an LC port and the other an FC port; both must be multimode interfaces operating at 850 nm.
Will the OM3 10-gigabit core work reliably with legacy 1 Gbit transceivers I still use?
Yes, the OM3 core is specified for 1G, 10G and 40G compatibility, so older 1 Gbit modules function normally.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








