暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 1TB 16x64GB DDR5 4800 CL40 2Rx4 RDIMM memory upgrade for Supermicro H14SST-G

SKU CH-F7RR-2Q4CC

A 1 TB kit of sixteen 64 GB DDR5-4800 registered ECC RDIMMs built for the Supermicro H14SST-G motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Full-capacity recognition at rated speed with exact-match DDR5 4800 CL40 2Rx4 kit
  • Verified fitment for Supermicro H14SST-G using required 288-pin Registered RDIMM form factor
  • Enterprise stability from Registered architecture and ECC preventing silent data corruption
  • Major OEM Samsung Micron Hynix chips ensuring consistent quality across all 16 modules
  • New condition 1TB kit delivers 16 x 64GB modules ready for full population

1 TB DDR5 RDIMM kit for Supermicro H14SST-G

This 1 TB kit contains sixteen 64 GB modules built to the DDR5 4800 standard. It targets administrators expanding memory on the Supermicro H14SST-G motherboard where registered ECC DIMMs are required. The CL40 timing and 1.10 V operation match the board's memory controller expectations.

Registered ECC design with 288-pin form factor

Registered architecture buffers the command bus so all sixteen slots can run fully populated without signal degradation. ECC corrects single-bit errors on the fly to prevent silent data corruption. The 288-pin RDIMM form factor fits only motherboards wired for registered DDR5, not unbuffered or SODIMM slots.

2Rx4 rank configuration decides fitment

Each module uses a 2Rx4 organisation that the memory controller must support in its population rules. If the board or CPU limits rank count per channel, the kit will not train at rated speed or capacity. Verify the manual's approved DIMM order before ordering.

特長

  • Full-capacity recognition at rated speed with exact-match DDR5 4800 CL40 2Rx4 kit
  • Verified fitment for Supermicro H14SST-G using required 288-pin Registered RDIMM form factor
  • Enterprise stability from Registered architecture and ECC preventing silent data corruption
  • Major OEM Samsung Micron Hynix chips ensuring consistent quality across all 16 modules
  • New condition 1TB kit delivers 16 x 64GB modules ready for full population

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the DDR5 4800 CL40 kit run at its rated speed on the H14SST-G?

The kit is spec-matched to the H14SST-G memory controller, so all 16 modules are recognised at full 4800 MT/s with CL40 timing.

What slot type and form factor must the motherboard provide for these modules?

The board needs 16 DDR5 RDIMM sockets using the 288-pin registered form factor; UDIMM or SODIMM slots will not accept them.

In what order should the 16 RDIMMs be populated on the H14SST-G?

Follow the motherboard manual's population sequence exactly; the 2Rx4 rank layout requires the approved slot order for full 1 TB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。