暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 288GB 6x48GB DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-96VQ-11MSP

Six 48 GB DDR5 ECC Registered DIMMs running at 4800 MHz with CL40 latency and 1.1 V for the Supermicro H13SSH-E motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

他に 30点の構成を表示
  • 288 GB total capacity for dense server workloads with six 48 GB modules
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data paths
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • CL40 latency at 1.1 V balances responsiveness with efficient power draw
  • Validated for Supermicro H13SSH-E motherboard ensuring correct 288-pin RDIMM fit

Exact-match upgrade kit

This 288GB kit contains six 48GB DDR5 4800 Registered ECC RDIMMs tuned to CL40 at 1.1V. It is built for administrators who need the precise rank, voltage and timing the server memory controller expects so the full capacity is recognised and runs at rated speed.

Verified fitment for Supermicro H13SSH-E

The modules use the 288-pin RDIMM form factor that this motherboard requires and are spec-matched to its population rules. Registered architecture offloads the memory controller so every slot can run fully populated, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Capacity and headroom

Six dual-rank 48GB modules deliver 288GB of addressable memory for large databases, virtualization clusters or in-memory analytics. Headroom ends when the board’s maximum supported capacity or approved population order is reached, so the manual must be consulted before installation.

特長

  • 288 GB total capacity for dense server workloads with six 48 GB modules
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data paths
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • CL40 latency at 1.1 V balances responsiveness with efficient power draw
  • Validated for Supermicro H13SSH-E motherboard ensuring correct 288-pin RDIMM fit

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does DDR5 4800 CL40 become the throughput bottleneck before the 288GB capacity fills under sustained full-slot load?

The kit runs at DDR5 4800 with CL40 timings at 1.1V across all six registered DIMMs; the memory controller on the Supermicro H13SSH-E determines whether frequency or capacity saturates first in your workload.

What thermals and power draw should I expect from six 48GB RDIMMs running continuously on the H13SSH-E?

Each module operates at 1.1V without heat spreaders; total power scales with all six slots populated, and airflow across the 288-pin RDIMM sockets manages thermals per the motherboard design.

What motherboard and firmware must already be in place for this 6x48GB kit to be recognised at full speed?

A Supermicro H13SSH-E motherboard with BIOS that supports DDR5 4800 Registered ECC 2Rx8 DIMMs and the correct population order for six modules is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。