暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 576GB 6x96GB DDR5 4800 CL40 1.1V 2Rx4 ECC Registered RDIMM Supermicro H13DSG-O-CPU memory upgrade

SKU CH-BWFM-PF863

Six 96 GB DDR5 4800 CL40 1.1 V 2Rx4 ECC registered RDIMMs validated for the Supermicro H13DSG-O-CPU motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

他に 30点の構成を表示
  • 576GB capacity across six 96GB modules maximises server memory density
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H13DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10V operation at 2Rx4 rank matches the motherboard's memory controller requirements
  • 288-pin RDIMM form factor ensures exact mechanical and electrical fit for the target board

576GB DDR5-4800 ECC RDIMM kit

This 576GB kit contains six 96GB DDR5-4800 Registered ECC RDIMMs built for the Supermicro H13DSG-O-CPU motherboard. It targets administrators who need maximum registered capacity on this specific platform.

288-pin Registered form factor

The 288-pin RDIMM modules use a registered architecture that buffers address and command signals, allowing all slots to run fully populated at the rated 4800 MT/s speed. ECC corrects single-bit errors on the fly to prevent silent data corruption in production workloads.

Upgrade from partial or mixed-capacity

Replacing smaller or mismatched DIMMs with this matched 6x96GB kit lets the memory controller recognise the full 576GB at its native CL40 timing and 1.1V operation. The jump is worth it when the server must run every slot at maximum registered capacity without downclocking.

特長

  • 576GB capacity across six 96GB modules maximises server memory density
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H13DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10V operation at 2Rx4 rank matches the motherboard's memory controller requirements
  • 288-pin RDIMM form factor ensures exact mechanical and electrical fit for the target board

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR5 4800 interface run at in this kit?

The modules operate at DDR5 4800 (PC5-38400) with CL40 latency at 1.1V, the exact timing the Supermicro H13DSG-O-CPU memory controller expects.

What physical slot and form factor do these modules need?

Each 96 GB module is a 288-pin RDIMM; the board requires Registered DIMMs, not UDIMM or SODIMM, and all six slots must be populated for the 576 GB kit.

How do I install the six modules in the correct order?

Follow the Supermicro H13DSG-O-CPU manual for the approved DIMM population sequence; the common mistake is filling slots out of order, which prevents the system from recognising the full 576 GB.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。