暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips in a 288-pin DDR5 RDIMM form factor

NEMIX RAM

NEMIX RAM 64GB DDR5 4800MHz CL40 2Rx4 1.1V 288-Pin ECC Registered RDIMM memory upgrade for Supermicro H14SST-G

SKU CH-GSFX-399ST

64 GB DDR5-4800 2Rx4 Registered ECC RDIMM at 1.1 V CL40, validated for the Supermicro H14SST-G motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB

他に 30点の構成を表示
  • 64 GB capacity lets you fully populate the Supermicro H14SST-G
  • DDR5 4800 speed with CL40 timing matches the board's rated specification
  • 2Rx4 registered ECC design offloads the memory controller for stable full-slot operation
  • 1 V standard voltage ensures correct signalling without manual tuning
  • 288-pin RDIMM form factor fits the motherboard's DIMM slots exactly

Exact DDR5 Server Upgrade

This 64 GB DDR5 RDIMM is built for the Supermicro H14SST-G motherboard. It delivers registered ECC memory in the 288-pin form factor that the board requires. The module arrives new and ready for installation in compatible server configurations.

Registered ECC With CL40 Timing

The stick runs at DDR5 4800 (PC5 38400) with a CAS latency of 40 at 1.10 V. Its 2Rx4 rank structure and registered buffer match the memory controller expectations for full capacity recognition and rated speed operation. Major OEM chips from Samsung, Micron or Hynix provide the underlying components.

Suited For Single Slot Population

Administrators expanding a supported Supermicro H14SST-G system with one 64 GB module will find this kit matches the documented population rules. Builders who need UDIMM or SODIMM form factors, non ECC memory, or different voltage and timing specifications should look at other memory types.

特長

  • 64 GB capacity lets you fully populate the Supermicro H14SST-G
  • DDR5 4800 speed with CL40 timing matches the board's rated specification
  • 2Rx4 registered ECC design offloads the memory controller for stable full-slot operation
  • 1 V standard voltage ensures correct signalling without manual tuning
  • 288-pin RDIMM form factor fits the motherboard's DIMM slots exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 4800MHz speed run at its rated frequency once installed in the Supermicro H14SST-G?

Yes, the module is spec-matched to the motherboard's memory controller so it is recognised at full capacity and operates at the DDR5 4800 (PC5 38400) data rate.

What does the 288-pin RDIMM interface mean for compatibility with the Supermicro H14SST-G?

The board requires a 288-pin Registered DIMM; this module matches that exact form factor and will not fit UDIMM or SODIMM slots.

Does the 2Rx4 rank configuration affect how I populate the DIMM slots on the H14SST-G?

The dual-rank 2Rx4 layout follows the board's population rules; consult the motherboard manual for the approved slot order when installing multiple modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。