暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 256GB 16x16GB CL40 1.1V H13SSF

SKU CH-XY2Z-5DHZD

256 GB DDR5 4800 ECC registered RDIMM kit in 16 modules, validated for Supermicro H13SSF motherboards

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity lets you run memory-heavy workloads without swapping
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • DDR5 4800 speed with CL40 timing delivers rated throughput for the Supermicro H13SSF
  • 1 V operation keeps power draw low while maintaining stability across all 16 modules
  • 288-pin RDIMM form factor matches the board's required slot type for full 16-slot population

Exact-match kit for Supermicro H13SSF

This 256GB kit contains sixteen 16GB DDR5 RDIMMs built to the precise rank, voltage and timing the H13SSF memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at the rated 4800 speed. The modules are new and validated for this specific motherboard.

Capacity and headroom

Sixteen 1Rx8 modules deliver 256GB total, letting memory-intensive workloads such as virtualisation hosts or in-memory databases keep large datasets in RAM. Each stick operates at 1.10V with CL40 latency, so the kit runs at its rated PC5-38400 throughput without overclocking. Population rules in the board manual still dictate maximum supported capacity per channel.

Thermals noise and power

Bare modules without heat spreaders rely on server chassis airflow for cooling; power draw stays at the standard 1.1V DDR5 level. Registered buffering reduces electrical load on the memory controller, helping stability when all sixteen slots are filled. Acoustic profile is dictated by the system fans, not the memory itself.

特長

  • 256 GB total capacity lets you run memory-heavy workloads without swapping
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • DDR5 4800 speed with CL40 timing delivers rated throughput for the Supermicro H13SSF
  • 1 V operation keeps power draw low while maintaining stability across all 16 modules
  • 288-pin RDIMM form factor matches the board's required slot type for full 16-slot population

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 256GB DDR5 4800 CL40 1Rx8 ECC RDIMM kit run at full speed alongside older DDR5 modules I already have?

Mixing modules with different speeds, latencies or ranks can force the motherboard to run all slots at the lowest common settings; for guaranteed 4800 MHz CL40 operation across all 16 slots, populate the board with identical 1Rx8 1.10V RDIMMs.

How can I confirm the 16x16GB DDR5 4800 ECC RDIMM kit is operating correctly after installation?

Enter the system BIOS or UEFI and verify that all 256GB are detected at DDR5-4800 with CL40 timings and ECC reported as active.

What is included in the 256GB 16x16GB DDR5 4800 ECC RDIMM kit and what must be purchased separately?

The package contains sixteen 16GB 288-pin DDR5 4800 CL40 1Rx8 1.10V ECC Registered RDIMM modules; no additional cables, brackets or software are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。