暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM MR38400-328K8 256GB (8x32GB) DDR5 4800 ECC RDIMM memory upgrade

SKU CH-DWWZ-4NXD9

A 256 GB kit of eight 32 GB DDR5 4800 ECC registered DIMMs validated for the Supermicro H13SSH-E motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity from eight 32 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H13SSH-E
  • Major-brand Samsung Micron Hynix chips ensure enterprise reliability

Supermicro H13SSH-E memory kit

This 256 GB kit supplies eight 32 GB DDR5-4800 RDIMMs built to the exact rank, voltage and timing the Supermicro H13SSH-E motherboard expects. It is designed for administrators who need the full 256 GB capacity recognised immediately without manual tuning. Builders using a different motherboard or a consumer platform should look elsewhere because the registered ECC pin-out and population rules are specific to this server board.

Capacity and headroom

Eight dual-rank modules deliver 256 GB of registered ECC memory at CL40 and 1.1 V, letting a fully populated H13SSH-E run every slot at the rated DDR5-4800 speed. The registered buffer offloads the memory controller so all channels remain stable at maximum capacity, while ECC corrects single-bit errors before they affect production workloads. Workloads that require more than 256 GB or faster than 4800 MT/s cannot be satisfied by this kit.

Build integration

Each module uses the 288-pin RDIMM form factor required by the H13SSH-E, so no UDIMM or SODIMM alternative will fit. The kit arrives as a matched set of eight, eliminating the need to source individual sticks or verify rank consistency across separate purchases. Installers must still consult the motherboard manual for the approved population order and any BIOS settings before seating the modules.

特長

  • 256 GB capacity from eight 32 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H13SSH-E
  • Major-brand Samsung Micron Hynix chips ensure enterprise reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 256GB DDR5 4800 kit work with the Supermicro H13SSH-E motherboard I already own?

Yes, the kit is verified for the Supermicro H13SSH-E and uses the 288-pin RDIMM form factor that board requires, so it installs in the existing DIMM slots without modification.

How can I confirm the modules are running at DDR5 4800 with ECC active after installation?

Enter the BIOS or use a tool such as dmidecode on Linux to verify the speed reads 4800 MT/s, the voltage shows 1.10 V, and ECC status reports enabled for each of the eight 32 GB modules.

Does the box contain only the eight 32 GB RDIMMs or are any extra parts included?

The package contains the 256 GB kit of eight 32 GB DDR5 4800 CL40 1.10 V 2Rx8 ECC RDIMMs and nothing else; no heat spreaders, cables, or tools are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。