We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM Supermicro H14DSG-OD memory upgrade

SKU CH-SB8C-XTZ3M

128GB DDR5 5600MHz ECC Registered RDIMM with CL46 latency and 1.1V operation, validated for the Supermicro H14DSG-OD motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

Show 30 more configurations
  • Exact-fit 128GB DDR5-5600 module runs at rated speed
  • Registered ECC 2Rx4 design prevents silent data corruption
  • 1V operation matches Supermicro H14DSG-OD memory controller
  • 288-pin RDIMM form factor installs in every supported slot
  • Lifetime replacement warranty with US-based technical support

Exact-match server upgrade

This 128GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM is built for the Supermicro H14DSG-OD motherboard. The 288-pin registered form factor matches the board's memory population rules so every slot can run fully populated at rated speed.

Replacing slower or smaller modules

Upgrading from lower-capacity DDR5 RDIMMs or slower CL46 kits makes sense when workloads need maximum registered ECC capacity per slot. The jump is worth it when the memory controller expects this exact rank, voltage and timing combination for full recognition.

Straightforward slot installation

The module drops into the 288-pin RDIMM sockets without extra cables or tools. What usually goes wrong is ignoring the motherboard manual's approved population order or mixing ranks, which can prevent the system from posting at full capacity.

Highlights

  • Exact-fit 128GB DDR5-5600 module runs at rated speed
  • Registered ECC 2Rx4 design prevents silent data corruption
  • 1V operation matches Supermicro H14DSG-OD memory controller
  • 288-pin RDIMM form factor installs in every supported slot
  • Lifetime replacement warranty with US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What slot type and pin count does the 288-pin RDIMM require on the Supermicro H14DSG-OD motherboard?

It uses a standard 288-pin DDR5 RDIMM slot; the board must support registered ECC modules in the correct population order shown in its manual.

Which population rule or slot order does the manual specify for installing this 2Rx4 registered module?

The motherboard manual lists the approved DIMM population sequence; follow that exact order so the memory controller recognises the full 128 GB at 5600 MHz.

When should the ECC registered module be replaced if corrected error counts start rising?

Monitor the platform's corrected-error counters; a sustained increase signals cell wear and means the DIMM should be swapped before uncorrectable errors appear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.