We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, no heat spreaders, gold contacts, black PCB, 288 pins

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM memory upgrade for Supermicro H14DSG-OM

SKU CH-Z21D-K5E60

192 GB DDR5-5600 registered ECC RDIMM kit (2 × 96 GB, CL46, 1.1 V) validated for Supermicro H14DSG-OM motherboards

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Show 30 more configurations
  • 192 GB capacity in a 2 x 96 GB kit for large memory workloads
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at CL46 latency matches the board's memory controller specs
  • Verified fit for Supermicro H14DSG-OM with 288-pin RDIMM form factor

192GB DDR5-5600 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5-5600 registered ECC modules built to the exact voltage, rank and timing the Supermicro H14DSG-OM memory controller expects. The 2Rx4 organisation and CL46 latency let the board recognise full capacity and run at rated speed without manual tuning.

Suited for dense memory configs.

The registered buffer and ECC logic are mandatory for this motherboard, so the kit works in fully populated servers that need error correction and signal stability. Builders using consumer boards, laptops or any platform that requires unbuffered UDIMM or SODIMM modules cannot use these DIMMs.

288-pin RDIMM form factor decides fit

Only motherboards wired for 288-pin DDR5 registered DIMMs will accept this kit; the key notch and electrical signalling differ from UDIMM, SODIMM and previous DDR generations. Check the H14DSG-OM manual for approved population order before installing.

Highlights

  • 192 GB capacity in a 2 x 96 GB kit for large memory workloads
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at CL46 latency matches the board's memory controller specs
  • Verified fit for Supermicro H14DSG-OM with 288-pin RDIMM form factor

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the kit include only the two 96GB RDIMMs or are any extra brackets or cables required?

The kit contains two 96GB DDR5 5600 CL46 1.1V 288-pin ECC Registered RDIMMs and nothing else.

Should I pick the 192GB 2Rx4 kit or look for a different capacity or rank for the H14DSG-OM?

This 192GB kit uses the exact 2Rx4 registered ECC configuration the H14DSG-OM memory controller expects for full-capacity recognition at rated speed.

Will the modules run at 5600 MT/s CL46 once installed in the Supermicro H14DSG-OM?

Yes, the kit is spec-matched to the board so each DIMM operates at DDR5-5600 with CL46 timing at 1.1V when populated per the manual.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.