We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 4800 CL40 2Rx4 ECC Registered RDIMM memory upgrade for Supermicro H14DST-F

SKU CH-35KK-865W0

A 192GB DDR5 kit (2x96GB) at 4800MHz CL40 with ECC Registered 2Rx4 modules built for the Supermicro H14DST-F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Show 30 more configurations
  • 192 GB capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank matches controller expectations
  • 288-pin RDIMM form factor fits Supermicro H14DST-F slots

Exact-match DDR5 upgrade

This 192 GB kit contains two 96 GB DDR5-4800 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H14DST-F memory controller expects. The modules run at 1.1 V with CL40 latency and 2Rx4 organisation for full-capacity recognition.

Verified fitment for H14DST-F

The 288-pin RDIMM form factor matches the board's registered-DIMM slots, not UDIMM or SODIMM sockets. Registered architecture offloads the memory controller so every populated slot operates at rated speed while ECC corrects single-bit errors on the fly.

Lifetime support included

The kit ships as a matched pair with no heat spreaders, ready for installation following the motherboard's population guide. A lifetime replacement warranty and free US-based technical support cover the modules for as long as they remain in service.

Highlights

  • 192 GB capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank matches controller expectations
  • 288-pin RDIMM form factor fits Supermicro H14DST-F slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 4800 MT/s DDR5 speed hold steady under continuous server workloads?

The kit is rated at DDR5 4800 (PC5 38400) with CL40 timings and 1.10 V; the registered buffer lets every slot run fully populated at that rated speed without down-clocking.

How much heat and power should I expect from two 96 GB RDIMMs running 24/7?

Each module operates at 1.10 V with no heat spreader, so typical DDR5 RDIMM power draw applies and airflow across the 288-pin slots is sufficient for continuous operation.

What motherboard feature must my Supermicro H14DST-F already have to use this 192 GB kit?

The board must support registered ECC RDIMMs with 2Rx4 organisation and DDR5 4800 at 1.1 V; the memory controller and BIOS then recognise the full 192 GB capacity at rated speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.