We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips no heat spreader 288 pin

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC RDIMM Supermicro H14DSG-OM

SKU CH-K3DM-8315D

A 32 GB DDR5 ECC registered DIMM kit (2 × 16 GB) at 5600 MT/s, CL46, 1.1 V, validated for the Supermicro H14DSG-OM motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Show 30 more configurations
  • 32 GB kit lets you run both channels at full capacity
  • DDR5 5600 CL46 matches the board's rated speed and timing
  • 1 V registered ECC RDIMM offloads the controller and corrects single-bit errors
  • 1Rx8 288-pin form factor fits the Supermicro H14DSG-OM memory slots exactly
  • Lifetime replacement warranty with US-based technical support included

Exact-match server kit

This 32 GB kit delivers two 16 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. Registered ECC design matches the Supermicro H14DSG-OM memory controller requirements for full-capacity recognition at rated speed.

Capacity and headroom

The dual-rank 1Rx8 organisation provides 32 GB of error-correcting memory for virtualisation hosts, database nodes or compute clusters. Registered buffering allows every slot to run fully populated, while ECC corrects single-bit errors before they affect production workloads.

Build integration

Modules use the 288-pin RDIMM form factor required by the target motherboard — not UDIMM or SODIMM. Consult the system manual for approved population order and maximum supported capacity before installation.

Highlights

  • 32 GB kit lets you run both channels at full capacity
  • DDR5 5600 CL46 matches the board's rated speed and timing
  • 1 V registered ECC RDIMM offloads the controller and corrects single-bit errors
  • 1Rx8 288-pin form factor fits the Supermicro H14DSG-OM memory slots exactly
  • Lifetime replacement warranty with US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this DDR5 5600 RDIMM kit run at its rated speed alongside older DDR5 modules in my Supermicro H14DSG-OM?

The kit is spec-matched to the motherboard's memory controller for DDR5 5600 CL46 at 1.1V. Mixing with modules of different speeds or timings will force the system to run all DIMMs at the lowest common settings.

How can I verify the 32GB kit is detected correctly after installing the two 16GB RDIMMs?

Check the BIOS memory information screen at boot; it should show 32GB total at DDR5 5600 with ECC active. The OS memory report should match that capacity without errors.

Does the package include only the two 288-pin RDIMMs, or are any brackets or cables supplied?

The package content lists the 32GB kit as two 16GB DDR5 5600 CL46 1.1V 288-pin ECC Registered RDIMMs only. No heat spreaders, brackets, or cables are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.