We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5-5600 ECC RDIMM CL46 1.1V 2Rx4 Supermicro H14DSG-OD memory upgrade

SKU CH-TT4N-N49F8

Four 96 GB DDR5-5600 registered ECC RDIMMs at 1.1 V and CL46 deliver 384 GB for the Supermicro H14DSG-OD motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Show 30 more configurations
  • 384 GB total capacity across four 96 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation fully populates Supermicro H14DSG-OD slots
  • 288-pin RDIMM form factor matches motherboard memory-population rules

Exact-match DDR5-5600 upgrade kit

This 384GB kit contains four 96GB DDR5-5600 ECC registered DIMMs built to the Supermicro H14DSG-OD motherboard's exact specifications. It targets administrators who need maximum registered capacity on this platform without mixing modules.

Sustained-load behaviour

Registered buffering offloads the memory controller so all four slots run fully populated at the rated 5600 MT/s speed, while on-die ECC corrects single-bit errors continuously during long compute runs. The 1.1V operating voltage keeps power draw stable across extended workloads.

Pre-order checks

Verify the motherboard manual for approved DIMM population order and maximum supported capacity per slot before purchase. Confirm the system requires 288-pin RDIMMs rather than UDIMMs or SODIMMs, and ensure the BIOS revision recognises 2Rx4 96GB modules at full speed.

Highlights

  • 384 GB total capacity across four 96 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation fully populates Supermicro H14DSG-OD slots
  • 288-pin RDIMM form factor matches motherboard memory-population rules

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.1V DDR5-5600 kit draw when the server runs continuously?

Each module operates at 1.10V. The registered architecture reduces electrical load on the memory controller, helping keep system power stable during 24/7 operation.

What must the Supermicro H14DSG-OD motherboard provide for this 288-pin RDIMM kit to function?

The board needs DDR5 RDIMM slots that support 2Rx4 registered ECC modules at 5600 MT/s, plus a BIOS that recognises the 96GB per DIMM density.

Will the 2Rx4 registered ECC modules work alongside any existing DDR5 RDIMMs already installed in the H14DSG-OD?

Mixing ranks or capacities can prevent full-speed operation. The motherboard manual specifies the approved population order; follow it exactly for stable 384GB operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.