We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight silver DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 1TB 8x128GB 5600MHz CL46 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-GGY1-JZTY5

Eight 128 GB DDR5 registered ECC RDIMMs deliver 1 TB at 5600 MHz with CL46 latency and 1.1 V operation for the Supermicro H13DSH

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1TB 8X128GB

Show 30 more configurations
  • 1TB kit (8 × 128GB) gives maximum capacity
  • DDR5 5600 (PC5-44800) runs at rated server speed
  • Registered ECC with CL46 prevents silent data corruption
  • 2Rx4 1.1V modules match Supermicro H13DSH requirements
  • 288-pin RDIMM form factor fits the board exactly

Exact-fit DDR5 kit for Supermicro H13DSH

This 1 TB kit contains eight 128 GB DDR5 RDIMMs rated at 5600 MT/s (PC5-44800). The modules are registered ECC with a 2Rx4 organisation, 1.1 V operation and CL46 latency, matching the memory controller expectations of the Supermicro H13DSH motherboard.

DDR5 registered ECC limits

Registered architecture buffers the address and command bus so all eight slots can be populated at the rated 5600 MT/s without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption that would otherwise require a reboot. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit or function.

No heat spreader, eight-slot population

Modules ship without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM connectors seat vertically in the board's DIMM slots; full eight-module population is supported when the motherboard manual's population order is followed. Builders needing fewer than eight modules or a different capacity must verify the board's supported configurations before purchase.

Highlights

  • 1TB kit (8 × 128GB) gives maximum capacity
  • DDR5 5600 (PC5-44800) runs at rated server speed
  • Registered ECC with CL46 prevents silent data corruption
  • 2Rx4 1.1V modules match Supermicro H13DSH requirements
  • 288-pin RDIMM form factor fits the board exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 1TB kit with eight 128GB modules or a smaller capacity for my Supermicro H13DSH?

The 1TB kit provides eight 128GB RDIMMs, filling all slots on the H13DSH for maximum capacity at DDR5-5600. Smaller kits leave slots empty and reduce total memory.

What does the DDR5-5600 rating mean once the modules are installed in the server?

The memory controller will run the kit at 5600 MT/s with CL46 latency at 1.1V, delivering the full PC5-44800 bandwidth the board supports.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The registered buffer reduces electrical load on the memory controller so all eight slots operate at 5600 MT/s, while ECC corrects single-bit errors to prevent data corruption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.