We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green 288-pin DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 768GB 6x128GB ECC RDIMM CL46 Supermicro H14DST-FL memory upgrade

SKU CH-XZRG-1WB4G

768 GB DDR5 5600 registered ECC kit in six 128 GB modules at 1.1 V CL46, validated for the Supermicro H14DST-FL motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

Show 30 more configurations
  • Exact-match 768 GB kit installs at full rated DDR5-5600 speed
  • 2Rx4 registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches motherboard memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL slots
  • Six 128 GB modules populate every channel for maximum capacity

Exact-match DDR5 upgrade

This 768GB kit contains six 128GB DDR5 5600 registered ECC RDIMMs built for the Supermicro H14DST-FL motherboard. The modules run at 1.1V with CL46 timing and a 2Rx4 rank structure that matches the board's memory controller requirements. Full-capacity population is supported without down-clocking.

For fully populated servers

The kit suits administrators who need every DIMM slot filled with registered ECC memory at the rated speed. Builders using unbuffered UDIMMs, SODIMMs, or non-ECC modules should look elsewhere because the platform requires registered DDR5 RDIMMs.

2Rx4 registered ECC RDIMM

The 2Rx4 registered ECC organisation is the single specification that decides compatibility. Only modules with this exact rank and buffering type will be recognised at full capacity and speed by the Supermicro H14DST-FL memory controller.

Highlights

  • Exact-match 768 GB kit installs at full rated DDR5-5600 speed
  • 2Rx4 registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches motherboard memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL slots
  • Six 128 GB modules populate every channel for maximum capacity

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 288-pin RDIMM form factor fit the Supermicro H14DST-FL memory slots?

Yes, the kit uses the 288-pin Registered RDIMM form factor that the H14DST-FL requires; it is not a UDIMM or SODIMM.

What population order should I follow when installing the six 128 GB modules?

Consult the H14DST-FL manual for the approved DIMM population sequence and install the modules in the exact slots specified to reach the full 768 GB capacity.

Will the ECC and registered design need any firmware updates or battery replacements over time?

No firmware updates or battery replacements are required for the ECC Registered RDIMMs; they operate at 1.1 V with CL46 timing for the life of the server.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.