We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold edge connector and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 5600 ECC RDIMM 2Rx4 CL46 1.1V Supermicro H14DSG-OM memory upgrade

SKU CH-654P-1A55Q

128 GB DDR5 5600 ECC registered DIMM with 2Rx4 organisation, CL46 timing and 1.1 V operation, validated for the Supermicro H14DSG-OM motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

Show 30 more configurations
  • 128 GB DDR5-5600 capacity for memory-intensive server workloads
  • 2Rx4 Registered ECC architecture corrects single-bit errors on the fly
  • CL46 1.10 V timing matches the H14DSG-OM controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type
  • Lifetime replacement warranty with US-based technical support included

Exact-match server upgrade

This 128GB DDR5 5600 Registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It installs as a direct replacement so the system recognises the full capacity and runs at its rated speed without manual tuning.

Single-module kit contents

The package supplies one 288-pin RDIMM rated at 1.1V CL46 2Rx4. No heat spreader, extra cables, software licences or additional sticks are included, so the only change is the memory capacity and registered ECC stability the board requires.

Straightforward slot installation

The module seats in the standard 288-pin DDR5 RDIMM slots following the motherboard population order. Most issues arise when the manual-specified sequence is ignored or when the board firmware has not been updated to support the full density.

Highlights

  • 128 GB DDR5-5600 capacity for memory-intensive server workloads
  • 2Rx4 Registered ECC architecture corrects single-bit errors on the fly
  • CL46 1.10 V timing matches the H14DSG-OM controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type
  • Lifetime replacement warranty with US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 128GB DDR5 RDIMM need a heat spreader added later?

The module ships without a heat spreader; standard server airflow across the 288-pin DDR5 slots is sufficient for the 1.1V operating voltage.

What limits sustained throughput on this 5600 MT/s ECC RDIMM?

The CL46 CAS latency and registered buffer set the timing ceiling; the memory controller on the Supermicro H14DSG-OM will run the kit at its rated 5600 speed when populated per the board's rules.

How much power and heat does the 128GB kit produce running all day?

At 1.1V the module draws low power for a 128GB DDR5 RDIMM; with no heat spreader it relies on chassis airflow, so typical server cooling keeps temperatures in normal range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.