We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module with black memory chips and gold edge connectors no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 4800MHz ECC Registered RDIMM 2Rx4 CL40 1.1V Supermicro H14DST-F memory upgrade

SKU CH-NPHF-9ZRPZ

128 GB DDR5 4800 MHz ECC registered RDIMM, 2Rx4 CL40 1.1 V, validated for Supermicro H14DST-F servers

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

Show 30 more configurations
  • 128GB capacity lets you fully populate Supermicro H14DST-F slots
  • DDR5 4800MHz PC5-38400 runs at the board's rated speed
  • Registered ECC 2Rx4 architecture offloads the memory controller and corrects single-bit errors
  • 1V CL40 timing matches the controller's exact voltage and latency requirements
  • 288-pin RDIMM form factor fits the motherboard's DDR5 slots precisely

128GB DDR5-4800 ECC RDIMM for Supermicro H14DST-F

This 128GB DDR5 4800MHz registered ECC module is built for the Supermicro H14DST-F motherboard. It delivers the exact 2Rx4 rank, 1.1V voltage and CL40 timing the platform expects. The 288-pin RDIMM form factor ensures full-capacity recognition in every supported slot. It targets administrators upgrading memory capacity on this specific server board.

Before ordering check your system manual

Verify the motherboard manual for approved DIMM population order and maximum supported capacity per channel. Confirm the board requires registered RDIMMs and not unbuffered UDIMMs or SODIMMs. Ensure the BIOS revision in use supports the stated speed and rank configuration. The module operates at 1.1V and CL40; the platform must accept these values.

Registered ECC design with major OEM chips

The registered architecture buffers address and command signals to reduce load on the memory controller when all slots are populated. On-die ECC corrects single-bit errors automatically to prevent silent data corruption. Samsung Micron or Hynix DRAM chips are used depending on supply. No heat spreader is fitted so airflow across the bare PCB is required in dense chassis.

Highlights

  • 128GB capacity lets you fully populate Supermicro H14DST-F slots
  • DDR5 4800MHz PC5-38400 runs at the board's rated speed
  • Registered ECC 2Rx4 architecture offloads the memory controller and corrects single-bit errors
  • 1V CL40 timing matches the controller's exact voltage and latency requirements
  • 288-pin RDIMM form factor fits the motherboard's DDR5 slots precisely

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box with the 128GB DDR5 4800MHz ECC RDIMM kit?

The kit contains one 128GB 288-pin DDR5 RDIMM module rated at 4800MHz PC5-38400, CL40, 1.1V, 2Rx4 registered ECC. No heat spreader, cables, or tools are included.

Should I choose the 128GB 2Rx4 CL40 version or a different capacity for my Supermicro H14DST-F?

Select this exact 128GB 2Rx4 CL40 1.1V RDIMM when your board's memory population rules call for a registered ECC DIMM of that rank, voltage, and timing; other capacities or ranks may not be recognised at full speed.

What does the 4800MHz PC5-38400 rating mean once the module is installed in the server?

The module will run at DDR5-4800 with a CAS latency of 40 at 1.1V, delivering the bandwidth and error-correction the H14DST-F memory controller expects for stable full-capacity operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.