NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 ECC RDIMM Supermicro H14DSH
- 1.1TB (12 x 96GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 1.1TB kit of twelve 96GB DDR5-4800 ECC registered RDIMMs at CL40 and 1.1V, validated for the Supermicro H14DSG-OM motherboard
Size 1.1TB 12X96GB
This 1.1TB kit contains 12 DDR5 96GB modules rated at 4800 MT/s with CL40 latency and 1.10V operation. The 2Rx4 Registered ECC RDIMM design matches the Supermicro H14DSG-OM memory controller requirements for full-capacity recognition at rated speed.
Registered buffering reduces electrical load on the memory controller so all 12 slots can be populated without signal degradation. ECC corrects single-bit errors on the fly to prevent silent data corruption in production workloads. The 288-pin RDIMM form factor is mandatory for this platform; UDIMM or SODIMM modules will not fit or function.
Replacing smaller or mixed-capacity kits with this uniform 12x96GB set eliminates population-rule conflicts and unlocks the full 1.1TB the board supports. The jump is worthwhile when workloads demand maximum registered ECC capacity at the native DDR5-4800 speed the platform specifies. Builders needing unbuffered memory or consumer form factors cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-9624K12 |
| Capacity | 1.1TB (12 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is specified at 1.10V and the registered architecture buffers each load, so the memory controller sees a consistent signal across every populated slot.
Each module runs at 1.10V with no integrated spreader; airflow across the 288-pin DDR5 RDIMMs is required to keep temperatures within the motherboard's limits.
The kit is validated for the H14DSG-OM motherboard; consult the board manual for the approved DIMM population order and any firmware version required.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?