NEMIX RAM DDR5 256GB 8x32GB 4800 CL40 1.1V 2Rx8 RDIMM ECC Supermicro H14DST-F memory upgrade
- 256GB (8 x 32GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
256 GB kit of eight 32 GB DDR5-4800 registered ECC RDIMMs at 1.1 V CL40, validated for the Supermicro H14DSG-O-CPU motherboard
Size 256GB 8X32GB
This 256GB kit contains eight 32GB DDR5 registered ECC modules rated at 4800 MT/s with CL40 latency and 1.1V operation. It is built for the Supermicro H14DSG-O-CPU motherboard where registered DIMMs are required for full-capacity population. The 2Rx8 organisation matches the board's memory-controller expectations so the system recognises every module at its rated speed. Buyers needing unbuffered UDIMMs or non-ECC memory for a workstation or desktop platform should look elsewhere.
Each module uses the standard 288-pin DDR5 RDIMM keying, so it seats in the board's DIMM slots like any registered server memory. Because the kit fills all eight channels, follow the motherboard manual's exact population sequence; skipping a slot or mixing ranks can prevent the system from posting. The modules have no heat spreaders, so verify that your chassis airflow reaches the memory area, especially in dense 1U or 2U enclosures where restricted airflow can raise module temperatures.
Confirm that your Supermicro H14DSG-O-CPU is running a BIOS version that supports 256GB of DDR5-4800 registered ECC with 2Rx8 modules. Check the manual for the approved DIMM population order and any per-channel or per-socket capacity limits before ordering. Ensure the server's power budget accommodates eight registered DIMMs at 1.1V, and that the chassis provides sufficient clearance for full-height 288-pin modules.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-328K8 |
| Capacity | 256GB (8 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 8X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Enter the BIOS and verify the memory speed shows 4800 MT/s with CAS latency 40 at 1.1 V; the registered ECC design lets all eight slots operate at rated timing when populated per the motherboard manual.
The box includes eight 32 GB DDR5 288-pin RDIMM modules; no extra parts are needed for the Supermicro H14DSG-O-CPU, but follow the board's population order for full capacity.
This exact-match kit provides the full 256 GB capacity with 2Rx8 registered ECC modules at 1.1 V CL40, matching the memory controller expectations for stable, fully populated operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?