We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules without heat spreaders in a tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 1.5TB 16x96GB CL40 1.1V Supermicro H14DST-FL

SKU CH-N2EM-KM1WH

A 1.5 TB DDR5 registered ECC memory kit with sixteen 96 GB modules running at 4800 MT/s, CL40, 1.1 V for the Supermicro H14DST-FL motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

Show 30 more configurations
  • 5 TB total capacity from 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC design prevents silent data corruption under full load
  • 2Rx4 dual-rank layout matches Supermicro H14DST-FL population rules
  • 288-pin RDIMM form factor fits the board's memory slots exactly

1.5TB DDR5 ECC RDIMM Kit for Supermicro H14DST-FL

This 1.5TB memory kit contains sixteen 96GB DDR5 4800MHz RDIMMs. It uses a 2Rx4 registered ECC design at 1.1V with CL40 latency. The 288-pin modules are built for the Supermicro H14DST-FL motherboard.

Suited for full-population server upgrades.

This kit fits administrators populating every slot on a Supermicro H14DST-FL with registered ECC memory. It is not for systems that require unbuffered UDIMMs or SODIMMs. Builders needing lower capacities or different form factors should look elsewhere.

Registered ECC architecture enables full-capacity

The registered buffer offloads the memory controller so all sixteen slots run at the rated 4800MHz speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. This combination decides whether the kit matches your server's requirements.

Highlights

  • 5 TB total capacity from 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC design prevents silent data corruption under full load
  • 2Rx4 dual-rank layout matches Supermicro H14DST-FL population rules
  • 288-pin RDIMM form factor fits the board's memory slots exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.10 V DDR5 kit draw when the Supermicro H14DST-FL runs all day?

Each 96 GB module operates at 1.10 V, the standard DDR5 voltage, so total draw scales with the 16-module population; the registered design reduces electrical load on the memory controller.

What must the Supermicro H14DST-FL already provide for this 1.5 TB kit to function?

The board needs 16 free 288-pin DDR5 RDIMM slots, a memory controller that supports 2Rx4 registered ECC at 4800 MT/s, and BIOS/firmware able to initialise the full 1.5 TB capacity.

Can I mix these 96 GB 2Rx4 DDR5 RDIMMs with smaller DDR5 registered ECC modules already installed in the same H14DST-FL?

Mixing ranks and capacities is governed by the motherboard's population rules; the manual should be consulted for approved DIMM order and maximum supported capacity per channel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.