We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 96GB 6x16GB CL40 1.1V 1Rx8 Supermicro H14DSG-O-CPU memory upgrade

SKU CH-QJW3-CSQJ6

A 96 GB DDR5-4800 ECC registered kit of six 16 GB modules at 1.1 V CL40, validated for the Supermicro H14DSG-O-CPU motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Show 30 more configurations
  • Exact-fit 96 GB DDR5 kit runs at rated 4800 MHz CL40 on Supermicro H14DSG-O-CPU
  • Registered ECC RDIMM architecture offloads controller and corrects single-bit errors for uptime
  • 1 V 1Rx8 modules match board voltage and rank specs for full-capacity recognition
  • 6 × 16 GB 288-pin layout follows motherboard population rules for stable multi-slot operation
  • Lifetime replacement warranty with free US-based technical support included

96GB DDR5-4800 ECC RDIMM kit for Supermicro

This 96GB kit contains six 16GB DDR5-4800 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-O-CPU memory controller expects. It targets administrators upgrading that specific platform to full capacity without guesswork.

288-pin Registered form factor

Each module uses the 288-pin RDIMM form factor required by the board; UDIMM or SODIMM alternatives will not fit. The registered architecture buffers address and command signals so all six slots can be populated at the rated 4800 MT/s speed.

1.1V operation with CL40 latency

Running at 1.1V, the kit draws minimal power for its density while maintaining CL40 timings at DDR5-4800. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.

Highlights

  • Exact-fit 96 GB DDR5 kit runs at rated 4800 MHz CL40 on Supermicro H14DSG-O-CPU
  • Registered ECC RDIMM architecture offloads controller and corrects single-bit errors for uptime
  • 1 V 1Rx8 modules match board voltage and rank specs for full-capacity recognition
  • 6 × 16 GB 288-pin layout follows motherboard population rules for stable multi-slot operation
  • Lifetime replacement warranty with free US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does DDR5 4800 PC5-38400 run at its rated speed on the Supermicro H14DSG-O-CPU?

The kit is spec-matched to the board's memory controller so it is recognized at full capacity and runs at DDR5 4800 without downclocking.

What physical slot and form factor do these modules need on the Supermicro H14DSG-O-CPU?

They require six 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM.

In what order should I populate the six 16GB RDIMMs on this motherboard?

Follow the motherboard manual's approved DIMM population sequence for 1Rx8 registered modules to ensure all 96GB are detected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.