We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight bare green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 768GB (8×96GB) 4800 CL40 1.1V 2Rx4 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-16K9-D29AP

Eight 96 GB DDR5 RDIMMs deliver 768 GB of registered ECC memory at 4800 MT/s for the Supermicro H14DST-F

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Show 30 more configurations
  • 768 GB total capacity from eight 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated timing for stable operation
  • Registered ECC architecture corrects single-bit errors and buffers signals for full-slot reliability
  • 1 V operating voltage reduces power draw while meeting DDR5 specification
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F memory slots exactly

Exact-match DDR5 server kit

This 768GB kit contains eight 96GB DDR5-4800 registered ECC RDIMMs built to the Supermicro H14DST-F memory specification. It targets administrators who need the full capacity their board recognises without manual tuning.

288-pin registered form factor

Each module uses the 288-pin RDIMM interface the motherboard requires, so no UDIMM or SODIMM will fit the slots. The registered architecture buffers address and control signals, allowing all channels to stay fully populated at rated speed.

1.1 V operation at CL40

Running at 1.10 volts with CL40 latency keeps power draw predictable while ECC corrects single-bit errors on the fly. The major-brand DRAM chips deliver the stability production workloads expect from a fully loaded server.

Highlights

  • 768 GB total capacity from eight 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated timing for stable operation
  • Registered ECC architecture corrects single-bit errors and buffers signals for full-slot reliability
  • 1 V operating voltage reduces power draw while meeting DDR5 specification
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F memory slots exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the DDR5 4800 (PC5-38400) interface cap at for this kit?

The kit runs at 4800 MT/s with CL40 latency and 1.10 V, the exact speed and timing the Supermicro H14DST-F memory controller expects for full-capacity operation.

What physical slot and module type are required to fit these 96 GB sticks?

Each module is a 288-pin DDR5 RDIMM; the board must accept registered DIMMs, not UDIMMs or SODIMMs, and all eight slots must support 2Rx4 density.

How are the eight modules installed, and which population step is often missed?

Follow the H14DST-F manual's DIMM population order for eight 96 GB RDIMMs; the step most people skip is verifying the approved slot sequence before seating every module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.