We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 1.1TB DDR5-4800 ECC RDIMM 12x96GB CL40 Supermicro H14DSG-O-CPU

SKU CH-NMDM-56QVS

1.1 TB DDR5-4800 ECC registered kit in twelve 96 GB modules for Supermicro H14DSG-O-CPU

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Show 30 more configurations
  • 1 TB capacity from twelve 96 GB modules
  • DDR5-4800 speed rated at PC5-38400
  • CL40 latency with 1.10 V operation
  • Registered ECC RDIMM for error correction
  • Verified compatible with Supermicro H14DSG-O-CPU

1.1TB DDR5 ECC RDIMM kit

This 1.1TB kit contains twelve 96GB DDR5-4800 registered ECC modules built for the Supermicro H14DSG-O-CPU motherboard. Each 288-pin RDIMM runs at 1.10V with CL40 latency and a 2Rx4 organisation. The registered design lets every slot stay populated while the memory controller stays stable.

DDR5-4800 registered ECC limits

DDR5-4800 sets the peak transfer rate at PC5-38400, and the registered buffer adds one cycle of latency versus unbuffered modules. ECC corrects single-bit errors on the fly but cannot fix multi-bit failures. The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots.

Twelve 96GB modules for dense workloads

Fully populating all twelve slots delivers 1.1TB of addressable memory for large databases, virtualisation hosts or HPC jobs that exceed smaller configurations. Workloads needing more capacity than 1.1TB or speeds above DDR5-4800 will require a different platform or memory generation.

Highlights

  • 1 TB capacity from twelve 96 GB modules
  • DDR5-4800 speed rated at PC5-38400
  • CL40 latency with 1.10 V operation
  • Registered ECC RDIMM for error correction
  • Verified compatible with Supermicro H14DSG-O-CPU

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 12-module 1.1TB kit or a smaller capacity for my Supermicro H14DSG-O-CPU?

The kit provides 12 x 96GB modules for a total of 1.1TB. Use it when your board's population rules call for fully populated channels at this density; otherwise select a lower-capacity kit that matches the approved DIMM layout in your manual.

What does the DDR5-4800 rating deliver once installed in the server?

The modules run at 4800 MT/s with CL40 latency at 1.10V, giving the memory controller the exact timing and voltage it expects for stable operation at the rated speed across all 12 slots.

How does the 288-pin RDIMM interface and registered design affect real-world limits?

The 288-pin Registered DIMM form factor is required by the H14DSG-O-CPU; the registered architecture buffers address and command signals so every slot can run fully populated at 96GB per module without overloading the controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.