We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM MR38400-328K8 256GB 8x32GB DDR5 4800 CL40 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-QBF9-Y6KF0

Eight 32 GB DDR5 RDIMMs deliver 256 GB of registered ECC memory at 4800 MHz CL40 1.1 V for the Supermicro H13DSH motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Show 30 more configurations
  • 256 GB total capacity from eight 32 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5-38400 delivers rated throughput on supported platforms
  • Registered ECC RDIMM architecture with 2Rx8 organisation corrects single-bit errors and offloads the memory controller
  • 10 V operating voltage matches the board specification for stable fully-populated operation
  • Verified compatibility with Supermicro H13DSH motherboard ensures correct fit and population rules

256GB DDR5 ECC RDIMM kit for Supermicro H13DSH

This 256GB kit contains eight 32GB DDR5 4800 RDIMM modules rated CL40 at 1.10V. The 2Rx8 registered ECC design matches the Supermicro H13DSH motherboard's requirements for full-capacity operation. It is built for servers that need registered memory with error correction across all populated slots.

Check your motherboard manual for population rules

Verify the H13DSH manual for approved DIMM population order and maximum supported capacity per channel before ordering. Confirm the board requires 288-pin registered DDR5 RDIMMs and not unbuffered or SODIMM variants. The kit will only run at its rated speed when installed in the correct slots.

Registered ECC design offloads the memory controller

The registered architecture reduces electrical load on the memory controller so all eight slots can run fully populated at 4800 MT/s. ECC corrects single-bit errors in flight to prevent silent data corruption. No heat spreaders are included, so ensure your chassis airflow meets the server's thermal design.

Highlights

  • 256 GB total capacity from eight 32 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5-38400 delivers rated throughput on supported platforms
  • Registered ECC RDIMM architecture with 2Rx8 organisation corrects single-bit errors and offloads the memory controller
  • 10 V operating voltage matches the board specification for stable fully-populated operation
  • Verified compatibility with Supermicro H13DSH motherboard ensures correct fit and population rules

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the 256GB kit and is anything else required?

The kit contains eight 32GB DDR5 4800 CL40 288-pin ECC Registered RDIMM modules. No additional parts are needed for installation on a compatible Supermicro H13DSH motherboard.

How do I decide between this 256GB kit and a smaller capacity?

Choose the 256GB (8 x 32GB) kit when your Supermicro H13DSH board supports full population at DDR5-4800 and you need the maximum registered ECC capacity this kit provides.

Will the DDR5-4800 CL40 rating run at that speed once installed?

Yes, the modules are spec-matched to the Supermicro H13DSH memory controller so the 2Rx8 registered ECC DIMMs operate at the rated 4800 MT/s with CL40 timing at 1.1V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.